What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Star brite Mildew Stain Remover 085616PC, Pump Spray-06/28/2018
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaPurpose of product.
Usage: Marine Mildew Stain RemoverStructure such as solid, liquid, aerosol etc.
Form: pump sprayDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 13, 20244041 SW 47th. Avenue
Fort Lauderdale FL 33314
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Purpose served by this chemical
FunctionChemical of Concern (CoC)
Chemical of Concern(CoC)Water 007732-18-5 -- Solvent No Sodium hypochlorite 007681-52-9 1.0-5.0 Oxidizing agent Yes 
CoC List
Sodium lauroyl sarcosinate 000137-16-6 0.1-1.0 Anionic Surfactant No Sodium hydroxide 001310-73-2 0.4525-0.4595 pH Adjuster Yes CoC List
Dodecylbenzenesulfonic acid, disodium salt 028519-02-0 -- Fragrance No Tetrasodium EDTA 000064-02-8 0.185-0.205 Chelating Agent No Trisodium nitrilotriacetate 005064-31-3 -- Processing Aid No -
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Safety Data Sheet (SDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Safety Data Sheet(SDS) Date that the Safety Data Sheet (SDS) was issued by manufacturer of a specific product.
SDS DATE :June 28, 2018 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING3 0 1 Measure of Alkalinity/Acidity of substance or preparation where a level of 7 is considered as neutral.
pH Levels12.0 -
Warnings
Hazard Statements
Danger. May be corrosive to metals. Causes severe skin burns and eye damage. Causes serious eye damage.
Precautionary Statements
General
None.
Prevention
Keep only in original container. Do not breathe mist, spray, vapors. Wash hands, forearms, and other exposed areas thoroughly after handling. Wear protective gloves, protective clothing, and eye protection.
Response
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Wash contaminated clothing before reuse.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Absorb spillage to prevent material damage.
Storage
Store locked up. Store in corrosive resistant container with a resistant inner liner.
Disposal
Dispose of contents/container in accordance with local, regional, national, territorial, provincial, and international regulations. -
Acute health effects
From SDS:
Hazards Identification
Emergency Overview
Danger. May be corrosive to metals. Causes severe skin burns and eye damage. Causes serious eye damage.
Potential Health Effects
Eye Contact: Causes permanent damage to the cornea, iris, or conjunctiva.
Skin Contact: Causes severe irritation which will progress to chemical burns.
Inhalation: May be corrosive to the respiratory tract.
Ingestion: May cause burns or irritation of the linings of the mouth, throat, and gastrointestinal tract.
General: Causes severe skin burns and eye damage. -
Chronic health effects
From SDS:
None known. -
Carcinogenicity
Sodium hypochlorite CAS No. 007681-52-9: IARC Group 3 -
Handling information
May be corrosive to metals. May release corrosive vapors. Do not mix with acids. Contact with acids liberates toxic gas. Ammonium or nitrogen containing compounds can react with the sodium hypochlorite in this product releasing toxic chlorine gas. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not breathe vapors, mist, and spray. Do not get in eyes, on skin, or on clothing. Handle empty containers with care because they may still present a hazard. Use appropriate personal protective equipment (PPE). Handle in accordance with good industrial hygiene and safety procedures. Wash contaminated clothing before reuse. Comply with applicable regulations. Keep container closed when not in use. Store in a dry, cool place. Keep/Store away from direct sunlight, extremely high or low temperatures and incompatible materials. Store in corrosive resistant container with a resistant inner liner. Store in original container or corrosive resistant and/or lined container. Store locked up/in a secure area.
-
Disposal information
Dispose of contents/container in accordance with local, regional, national, territorial, provincial, and international regulations. Container may remain hazardous when empty. Continue to observe all precautions. Avoid release to the environment. This material is hazardous to the aquatic environment. Keep out of sewers and waterways.
-
First Aid
Eye Contact: Immediately rinse with water for at least 30 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention.Skin Contact: Immediately remove contaminated clothing. Immediately flush skin with plenty of water for at least 30 minutes. Get immediate medical advice/attention.Inhalation: Remove to fresh air and keep at rest in a position comfortable for breathing. Immediately call a poison center or doctor/physician.Ingestion: Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.General: Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible).
-
UN Global Harmonization Classification
